MOTUC preguntas y respuestas para Mattel.

jajajajaja, esque el vintage se ve bien feo y el 200X no lo e visto pero esta estaria articulada, a ver como se la juegan!!!

cifrax escribió:jajajajaja, esque el vintage se ve bien feo y el 200X no lo e visto pero esta estaria articulada, a ver como se la juegan!!!

Caballero le informo y advierto que esa figura es una de mis preferidas , esta cruzando una linea sin retorno jejeje :see:

Pues le informo, que peligro es mi segundo apellido, porque el segundo nombre es carnicero y compañero atravesar líneas sin retorno es lo que hago en mi tiempo libre, el vintage, parece un quilo como los que se tragaban en V!!!! :see:

jajajajaja oki Don Peligro

jajajajajaja :Hee:

Jajaja no cambien! :ris:

Para hacerle cierto honor a la figura vintage sería bueno que saliera peludillo pero no tan peludo como el original, con un toquecillo basta.

jajajaja en realidad si asi como 200x con espacio para que no se pegue la articulacion y se vea peludo pero que no parezca una cuilo de los de V la de antaño

Ya vi como es, si esta tuanis, es mejor esto



a esto, jueputa mas feo!!!!!

jajajaja uds no saben lo que esa figura le hizo alas barbies de mis primas en mi infancia jajaja le tenían terror a ese muñeco y a mi me encantaba el come Barbies

jajajajaja, que bueno el come barbies, alguna vez vio una movie que se llamaba creaturas??

sip se a que se refiere jajajaja

Low-Light escribió:jajajaja uds no saben lo que esa figura le hizo alas barbies de mis primas en mi infancia jajaja le tenían terror a ese muñeco y a mi me encantaba el come Barbies

a las de mis primas ? aha si claro jejejejej

No imagino lo que ese bicho debe tener entre las piernas para que las barbies entren en semejante histeria, jaja!!

Grizzlor tiene que ser pleudo. No hay razon para que este no sea peludo tambien. Siempre lo ha sido y así se debe de quedar.
Estoy con Low Light en esto.

Mr. Bock escribió:Era aquí que tenía que postear esto se me fue. Lo pongo aca tambien por aqullo.

Aca les dejo las preguntas y las respuestas de este mes. Si alguien quiere ayudarme a traducirlas por favor hagalo, se los agradecería:

Pop Culture Network

1) Some individuals were charged customs fees on the Weapons Pak and Evil Lyn together or Evil lyn and Wun-Dar together. How are we going to be affected with Tytus and other large scale figures being $40 and possibly custom charged with that and going forward with the all-in subscription?

We are always working on improving the custom fee issues. Many times this is out of our hands as we need to follow local custom requirements, something Mattel does not control.

2) Hasbro does a "Fan's Choice" figure in their Star Wars line. What is the possibility of doing something like this with MOTUC? Perhaps giving a list of possible character options to the fans then letting them vote on the one they want to see the most?

With MOTUC there is a much more limited character selection and we need to control the release order in terms of tooling availability as well as the information we reveal in the bios. So we won’t be offering a fan’s poll for this line. But in many ways EVERY figure is a fans choice. Just look at Optikk, we did him purely because he came up so much in fan polls!

3) Where did the "Space Mutants" logo design on Optikk's package come from? What was the influence?

The design is totally original, but it was inspired by “B movie” poster design of the 50s. Basically, I thought that the name SPACE MUTANTS lends itself to that type of design. However, the font for MUTANTS is the same Serif Gothic font that was used on MOTU packaging in the past. So, you have a homage to movies like “THEM” or “ATTACK OF THE 50 FOOT WOMAN” and a tie to MASTERS at the same time.

4) It seems figures such as Tytus have hit online auctions before their release. We understand that you probably can't comment on the matter much, but many have wondered if this will effect the number of figures that will actually be on sale on MattyCollector.com.

The illegal sale of stolen Mattel product will not affect the sale or number of figures sold on Mattycollector.com.

5) Many have epxressed dissapointment in the lack of articulation on Tytus. Is this a cost cutting measure? Any chance of seeing future giants have more articulation, or will they be basically the same build?

When we looked into doing Tytus we wanted to get as much articulation in as possible. We crunched the numbers and the only way to keep him under $100 was to use roto molding, which does limit some of the articulation. If there is enough interest in paying over $100 for Tytus we could look at an updated one down the road.
Quote:
Figures.com

It was previously stated that Tytus' price point would have been $100 if he had all the regular MOTUC articulation joints. How can the price go up so high if your Ghostbusters 12" figures are only $60?

The 12" Movie Masters figure is a completely different style of figure. To do a highly articulated MOTUC style figure at 12" would be very expensive.

Why was Optikk the first character to be made from the New Adventures of He-Man and when can we look forward to He-Man or Skeletor versions based on the show?

Optikk came up the most in fan posts online! See, we do read the posts!

How is the Masters of the Universe film coming along and has there been any significant changes to the story/plot know that the picture is at Colombia Pictures?

We are very excited about a MOTU live action film but we can't comment on any details at this time! Stay tuned.
Quote:
NEW SITE!!!!
hordak.de

1.Will Orko and Adam (mattycollector version) have the increased production numbers or have they been produced before She-Ra? Are there more SDCC versions or the matty one or are they 50/50?

Sorry, we can’t comment on production runs, but we can say that if we sell out of the Mattycollector.com version we can certainly do a second run!

2. She-Ra has been named a huge A-List character, who could be refreshed a couple of times down the road. Did you mean the Starburst and Bubble Power variants or even She-Ra in her mutliple fantastic fashions? Wouldn't that be cool way to include some of these accessories?

Yup, both of those would be great ways to re-fresh the Princess of Power down the road.

3. In 1987 the Snakemen have been the main villains for the PoG toyline that died early. Do you know if there have been other Snakemen planned that fans don't know of? And if so, are there plans to include them into MotUC?

The only new figures planned for the 1987 line were He-Ro and Eldor. There were no additional Snakemen planned at the time. We checked!

4. Will we see the September and October figures before SDCC like we did last year? There's a lot of rumour going on about Roboto being the September figure. Any hints for the fans?

You will see the September figure at Wizard World Philly. Toy Guru will be in person to reveal him, her or it.

5. Some fans noticed that the promo-pictures on mattycollector often do not justice to the figures- Battle-Cat's saddle slit off his back, Optikk has two right hands and so on. Is there any way to improve these in the future or to remove them and take better ones?

Many times these images are of early prototypes, but we will do our best to update the images as much as possible!
Quote:
NEW SITE!!!!
http://www.maitresdelunivers.org/

1) Will the reissue of Teela include the same waist joint Evil-Lyn has?

The original figure had the same waist joint, it was just hard to move due to the stiff plastic used. Going forward all females will have the softer plastic Evil Lyn had.

2) Without revealing the name of the characters from September to the end of this year, what is the porportion of characters from the various brands? For example can we expect 2 charcaters from the vintage line, 1 from N.A and 1 from the POP.

Because release order is always up in the air, this isn’t something we can lock down. What we will say is the remaining four figures for 2010 will really help fill some gaps!

3) In June 2009 we got the ruthless leader of the Evil Horde "Hordak", where is the rest of his army? I mean when will the Horde characters come?

More Horde figures are on there way. Ideally, we will have at least one to show off at SDCC.

4) Without revealing the name of the 2011 Club Eternia subscription exclusive figure, can you give us some clews of him/her?

The club figure for 2011 is from a mini comic! That is all we will say until SDCC.

5) You said in previous Q&A that Mattel may work on a European logistical distribution, for the old continent residents who ordered on Mattycollector in order to reduce delay for the dellivery porcess. Is Mattel still working/thinking on it?

We are looking into this, but right now there simply is not enough demand from any one region outside of the US to justify a second distribution center. If this changes and demand increases we would love to keep exploring this option!
Quote:
The MOTUC Portal

1. She-Ra looks great imo, I love the "modern" head - can you clarify, is she Adam's twin sister in MOTUC canon or a younger sister?

She is Adam’s twin sister but Adam was born first by about three minutes.

2. The paw print on Gygor's back - does it stand for something, i.e., clan, race, army, etc.?

It is the symbol of his clan.

3. I love the Mattel print ads for the MOTUC figures. Battle Cat had one, Keldor has one - no Tytus though? Can you share, what's the process for determining which bonus figure gets an ad?

For the most part only the monthly figures will get print ads. We did one for Battle Cat to help promote the first “Beast Figure” and Keldor since he might have wound up a monthly figure if the September figure slipped. The ads are planned well in advance. Not every bonus figure will have a print ad.

4. Any update on the Zoar stand and armor - can you tell us if we can expect to see it in 2010?

We can’t confirm when, but it is coming eventually!

5. With technology growing so fast, has Mattel considered creating an iPhone/iPod Touch/iPad app that could be updated regularly with MOTUC character bios and pics? Could be a great opportunity!

Yes, this is something we are interested in exploring. Stay tuned!

Que monton de informacion!

Un hordeano en el comic con.
Un nuevo weapons pack
La figura de suscripcion un personaje de comics.
La pechera de zoar !

Wow mucho pero mucho que esperar.

La pechera de zoar servirá para enmendar un gran error

Rey Hiss escribió:La pechera de zoar servirá para enmendar un gran error

Muy cierto muy cierto

La pechera de Zoar supongo que vendrá en el weapon pak. Por otro lado encontré otra imagen de Geldor:

wow que bien se ve me gusta me gusta

Hordeano, hmmmm...Catra? Ojala! Aunque pensemos de este modo. Si no recuerdo mal, todos los hordeanos tienen molde unico no?
Modulok
Grizzlor
Leech
Mantenna
Mosquitor
Dragstor
Multi-Bot
Trooper
Calix (???)

Pensemos como Mattel. Que figura de esta podemos re-utilizar para crear un nuevo personaje? Como se usaron los guantes de Hordak. Creo que entraria Mosquitor y Dragstor en esta categoria, pero descarto a Dragstor, no creo que sea uno de los horde mas populares. En cambio Mosquitor puede que lo sea. Digamos que los antebrazos pueden ser los de Whiplash, puños normales, botas de Hordak o nuevas (estilo vintage), y creo que ya estaria. Solo deberian hacer la pechera y la cabeza, obvio.
El otro mas facil puede que sea Grizzlor, con el molde de Beastman sale tranquilo, o eso creo.

si fijo son Mantenna , Grizzlor , Leech y Mosquitor pq son los que lo 4 Horsemens sacaron para 200x las esculturas y me imagino que es por algo (por dicha pq esos 4 viejos son demis favoritos) :Hee:

Los accesorios de Zoar vendrán con alguna figura, no con el Pak, espero.

El cuerpo de Beast-Man es igual de bueno que cualquier otro para Grizzlor, debajo del pelo no se verá, o bien será una nueva escultura, por lo que no sería reutilizable.

Yo apuesto por Dragstor. Los 4H demostraron con Scareglow que tienen interés en diseñar con cierta antelación a los personajes que se dejaron en 200x así como a los menos conocidos para mezclarlos con los principales

Buen punto de vista Lex_alfa. De verdad que los 4H han hecho personajes que uno nunca se esperaba. Yo siempre crei que esos personajes, como Optikk, scare glow o Tytus, los hicieron para matarles el negocio a los revendedores.

pues si por eso yo espero ver a Dragstor pronto y a Spikor pq esos quedaron faltantes en los staction

Tenemos info sobre la reina Marlena. Al parecer Mattel la puede hacer identica a la de Filmation sin problema alguno.
Osea caballeros tendremos una perfecta Marlena en MOTUC.

We can absolutely do Queen Marlena. She appeared in both the original mini-comics and the 2002 series, which are both available for the current line. She was a Mattel-created character and we can put her in any colored dress we would like (including Green).